* Refactor BLE transport event handling
* Make image output paths unique
* Keep queued Nostr read receipts alive
* Refine BLE ingress fanout
* Rediscover BLE service after invalidation
* Extract BLE notification retry buffer
* Extract BLE inbound write buffer
* Extract BLE fragment assembly buffer
* Tidy secure log handling from device run
* Allow self-authored RSR ingress replies
* Harden read receipt queue test timing
---------
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
* add signatures to file transfers and LEAVE messages
* chore: setup project for local development and signing
---------
Co-authored-by: jack <212554440+jackjackbits@users.noreply.github.com>
* Expand coverage for transport, chat, and media flows
* Stabilize transport and media coverage tests
---------
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
* Expand coverage for relay, identity, and location flows
* Fix macOS SwiftPM CI failures
---------
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
* fix: Rate limit iOS peer notifications to prevent flood
- Remove aggressive formIntersection that cleared recentlySeenPeers
when peers temporarily dropped, causing them to be treated as "new"
- Add 5-minute cooldown between notifications (aligns with Android)
- Use fixed notification identifier so iOS updates existing notification
instead of creating new ones
- Only mark peers as seen when notification is sent, so peers arriving
during cooldown are included in the next notification
Fixes notification spam every 10-30 seconds when peers fluctuate.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* chore: Bump version to 1.5.1
---------
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* Fix iOS BLE mesh authentication bypass chain in BLEService
- Bind sender IDs to BLE connection UUIDs for peripherals and centrals to prevent spoofing
- Enforce explicit RSR request/response validation and remove legacy TTL==0 RSR path
- Remove TTL==0 unconditional acceptance for messages and file transfers
- Ensure gossip sync caching only occurs after a packet is accepted
- Preserve self‑sync TTL==0 dedup exception without weakening authentication
* fix: toctou in boundPeerID identified by codex
* fix: Remove unused variable and bump version to 1.5.1
- Remove unused messageType variable (compiler warning fix)
- Bump marketing version to 1.5.1
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: jack <212554440+jackjackbits@users.noreply.github.com>
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* feat: Implement Request Sync Manager (V2 Sync)
- Add RequestSyncManager to track and attribute sync requests
- Update BitchatPacket and BinaryProtocol to support IS_RSR flag (0x10)
- Update RequestSyncPacket with new TLV fields (sinceTimestamp, fragmentIdFilter)
- Update GossipSyncManager to use unicast sync requests and mark responses as RSR
- Update BLEService to enforce timestamp validation for normal packets and exempt valid RSRs
- Add documentation for the new sync manager mechanism
* fix: Resolve compilation errors in V2 Sync implementation
- Remove duplicate restartGossipManager in BLEService
- Add missing TransportConfig constants for sync
- Add 'sync' log category to BitLogger
- Add missing BitLogger import in GossipSyncManager
* fix: Update tests for V2 Sync changes
- Add requestSyncManager parameter to GossipSyncManager init in tests
- Implement getConnectedPeers stub in RecordingDelegate
- Remove unused variable warning in SubscriptionRateLimitTests
---------
Co-authored-by: a1denvalu3 <>
Co-authored-by: jack <212554440+jackjackbits@users.noreply.github.com>
* Improve BLE mesh reliability for large transfers
Major reliability improvements for fragment-based transfers (photos, files):
**Notification Queue Fixes**
- Fix silent packet loss when notification queue is full - now queues for retry
- Fix retry queue bug where remaining items were lost when one retry failed
- Add periodic drain mechanism as backup (every 5 seconds)
**Write Queue Fixes**
- Fix drainPendingWrites to use atomic take-send-requeue pattern
- Add logging when peripheral is ready for more writes
- Add periodic drain for pending writes as backup
**Fragment Pacing**
- Increase fragment spacing from 4-5ms to 25-30ms to prevent buffer overflow
- Conservative pacing prevents packet loss on congested BLE connections
**Thread Safety**
- Fix race conditions in stopServices() and emergencyDisconnectAll()
- Synchronize access to peripherals/centrals dictionaries during cleanup
- Clear pending message queues in emergencyDisconnectAll()
**Error Recovery**
- Add handlers for all BLE state transitions (poweredOff, unauthorized, etc.)
- Clear Noise session and re-initiate handshake on decryption failure
- Queue ACKs/receipts for delivery after handshake instead of dropping
- Re-queue failed pending messages for retry
**Other Improvements**
- Add route freshness validation in MeshTopologyTracker (60s threshold)
- Add TTL (24h) and size limits (100 per peer) for MessageRouter outbox
- Fix connection timeout to check peripheral.state before canceling
- Add NoiseEncryptionService.clearSession(for:) method
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* Fix race condition and increase test timeouts
- Fix race in sendNoisePayload: use sync barrier instead of async
to ensure payload is queued before initiating handshake
(addresses Codex review feedback)
- Increase BLEServiceTests sleep from 0.5s to 1.0s for CI reliability
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: jack <jackjackbits@users.noreply.github.com>
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Move updateNeighbors call to after signature verification passes,
preventing spoofed or stale announces from injecting bad routing data.
Also reset isNewPeer/isReconnectedPeer flags on verification failure
to prevent spurious peer connection notifications.
Addresses review feedback from PR #938.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
When selectedPrivateChatPeer was migrated to a 64-hex stable Noise key
after session establishment, file transfers would silently fail because:
1. Sender used raw 64-hex key, truncated to first 8 bytes by BinaryProtocol
2. Receiver's myPeerID is SHA256-fingerprint-derived (different value)
3. Recipient check failed, causing silent packet drop
The fix normalizes peerID to short form (SHA256-derived 16-hex) in
sendFilePrivate before constructing recipientData, ensuring the wire
format matches what receivers expect.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
The original PR introduced a PendingFileManager that held incoming files
in memory until user acceptance. However, this approach had issues:
1. No UI was implemented for users to accept/decline files
2. Files would expire after 5 minutes, losing legitimate transfers
3. The app only allows specific media types (photos, audio) that users
explicitly choose to send, so manual acceptance adds friction
This commit replaces the pending file system with disk quota management:
- Auto-save files immediately (preserving original UX)
- Enforce 100 MB storage quota for incoming files
- Auto-delete oldest files when quota is exceeded
- Logs cleanup activity for visibility
This directly addresses the DoS vulnerability (disk exhaustion from
file spam) while maintaining good UX for legitimate transfers.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Update lastAnnounceTime to 'now' when rate-limiting subscription attempts.
This ensures each blocked attempt extends the suppression window, preventing
attackers from waiting out the backoff while continuously spamming attempts.
Previously, the backoff timer was only based on the last successful announce,
allowing attackers to receive an announce as soon as the initial backoff
expired regardless of how many blocked attempts occurred in between.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
P1: Wire didReceivePendingFileTransfer into ChatViewModel
- Add implementation that creates system message for pending files
- Route to appropriate chat (public/private)
- Send local notification for incoming files
- Auto-decline files from blocked users
P2: Keep pending files in queue if save fails
- Only remove file from pendingFiles after successful save
- Allows user to retry accept if initial save failed
Also adds test for save failure scenario.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Add proper error classification to distinguish expected states (item not
found) from critical failures (access denied, storage full) and
recoverable errors (device locked, auth failed).
Changes:
- Add KeychainReadResult and KeychainSaveResult enums with error types
- Add getIdentityKeyWithResult/saveIdentityKeyWithResult protocol methods
- Implement retry logic with exponential backoff for transient errors
- Add consistent SecureLogger logging for all keychain operations
- Update NoiseEncryptionService identity loading to handle errors gracefully
- Update MockKeychain and TrackingMockKeychain with error simulation
- Add comprehensive KeychainErrorHandlingTests (18 new tests)
Security: Applications can now properly detect and respond to critical
keychain failures, improving resilience during device lock states and
providing actionable diagnostics for access issues.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds rate-limiting to prevent device enumeration attacks via rapid
subscription/disconnect cycles. Without this fix, an attacker could
enumerate ~120 bitchat devices per minute by connecting, subscribing,
capturing the announce packet, then disconnecting and moving to the next.
Key changes:
- Add per-central rate-limit tracking with exponential backoff
- Minimum 2-second interval between announces per central
- Exponential backoff (2x) up to 30 seconds for rapid reconnects
- After 5 rapid attempts, suppress announces entirely (likely attack)
- Clean up stale rate-limit entries after 60-second window
- Clear rate-limit state during panic mode
Configuration:
- bleSubscriptionRateLimitMinSeconds: 2.0
- bleSubscriptionRateLimitBackoffFactor: 2.0
- bleSubscriptionRateLimitMaxBackoffSeconds: 30.0
- bleSubscriptionRateLimitWindowSeconds: 60.0
- bleSubscriptionRateLimitMaxAttempts: 5
Security audit reference: Cure53 BCH-01-004 (Medium severity)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Incoming files are now held in memory via PendingFileManager instead of
being auto-saved to disk. Users must explicitly accept files before they
are written. This prevents attackers from exhausting device storage.
Key changes:
- Add PendingFileManager with configurable limits (max 10 files, 5MB total)
- Files auto-expire after 5 minutes if not accepted
- LRU eviction when limits are exceeded
- Pending files cleared during panic mode (emergencyDisconnectAll)
- Add didReceivePendingFileTransfer delegate method
- Add acceptPendingFile/declinePendingFile to Transport protocol
Security audit reference: Cure53 BCH-01-002 (Medium severity)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Added @MainActor annotation to both LRUDeduplicationCache and
MessageDeduplicationService classes. This provides compile-time
enforcement of thread safety since all callers (ChatViewModel,
NostrRelayManager) are already on MainActor.
Benefits:
- Compile-time enforcement prevents future misuse
- Simpler than internal locking mechanisms
- Consistent with existing patterns in codebase
Also adds:
- @MainActor annotation to existing test suites
- 5 new concurrency tests verifying thread safety behavior
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Synchronized access to readQueue and isSendingReadAcks using the
existing concurrent DispatchQueue with barrier flags:
- sendReadReceipt(): wrap enqueue in barrier async
- processReadQueueIfNeeded(): extract item within barrier context
- scheduleNextReadAck(): wrap callback in barrier async
This fixes race conditions where concurrent calls could corrupt the
read queue or cause check-then-act bugs on isSendingReadAcks.
Also adds thread safety tests:
- concurrentReadReceiptEnqueue: 100 concurrent enqueue operations
- readQueueProcessingUnderLoad: concurrent enqueue during processing
- isPeerReachableThreadSafety: concurrent read access test
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Merge KeychainHelper functionality into KeychainManager to provide
a single, unified API for all keychain operations.
- Remove KeychainHelper.swift and KeychainHelperProtocol
- Add generic save/load/delete methods to KeychainManagerProtocol
- Update NostrIdentityBridge to use KeychainManagerProtocol
- Update FavoritesPersistenceService to use KeychainManagerProtocol
- Update PreviewKeychainManager with new methods
- Update MockKeychain and add MockKeychainHelper typealias for backwards compatibility
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Decouple MessageRouter from specific Mesh/Nostr implementations
- Update NostrTransport to implement isPeerReachable using a local cache of favorited peers
- Update ChatViewModel to inject transports as a list
- Mark NostrTransport as @unchecked Sendable to handle internal thread safety
Pass the UserDefaults-backed sentReadReceipts from ChatViewModel to
consolidateMessages() to correctly identify already-read messages
after app restart. This prevents duplicate read receipts and incorrect
unread badges when reopening a chat shortly after reading it.
Addresses PR review feedback.
- Remove duplicate Regexes enum, use MessageFormattingEngine.Patterns
- Delete unused formatMessage() function (views use formatMessageAsText)
- Move message consolidation logic to PrivateChatManager
- Add consolidateMessages() and syncReadReceiptsForSentMessages()
- Wire PrivateChatManager to UnifiedPeerService for peer lookup
Reduces ChatViewModel from 5998 to 5713 lines (-285 lines)
All 303 tests pass
Add isRunningTests check to LocationStateManager to skip CoreLocation
delegate and permission initialization in test/CI environments.
This prevents potential blocking or unexpected behavior when tests
access LocationStateManager.shared.
Add checks for GITHUB_ACTIONS, CI, and XCTestBundlePath environment
variables to reliably detect test/CI environments where notification
APIs should be skipped.
Remove Bundle.main.bundleIdentifier == nil from isRunningTests
detection as it may have unintended side effects in CI environments.
The XCTestCase class check and XCTestConfigurationFilePath environment
variable are sufficient for detecting both XCTest and Swift Testing.
