mirror of
https://github.com/permissionlesstech/bitchat.git
synced 2026-07-25 08:25:21 +00:00
jackandClaude Fable 5
81168adad1
New MessageType 0x23 carries TLV-encoded board posts and tombstones,
self-signed with the author's Ed25519 key ("bitchat-board-v1" /
"bitchat-board-del-v1" domains) so notices verify without the author
present. BoardStore persists raw signed packets under Application
Support/board/ (200 posts, 5 per author, oldest evicted; expiry sweep;
tombstones retained until the deleted post's original expiry) and is
wiped on panic.
Board packets join gossip sync as bit 8 of the existing variable-length
types bitfield (a second byte old decoders already accept and ignore),
with a 60s round and its own capacity, served straight from the board
store so retention has one owner. Posts relay like broadcasts; urgent
posts get the announce-class TTL cap.
UI: a pin button in the header opens the board for the current channel
(geohash board, or mesh-local board), with urgent-pinned newest-first
listing, compose with urgent toggle and 1/3/7-day expiry, and
swipe-delete on own posts. Geohash posts also publish one-way as
Nostr kind-1 location notes when relays are reachable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Test Harness Guide
This test suite uses an in-memory networking harness to make end-to-end and integration tests deterministic, fast, and race-free without touching production code.
In-Memory Bus
- File:
bitchatTests/Mocks/MockBLEService.swift - Registry/Adjacency: Global
registrymapspeerIDto aMockBLEServiceinstance;adjacencyrecords simulated links between peers. - Setup: Call
MockBLEService.resetTestBus()insetUp()to clear state between tests. - Topology: Use
simulateConnectedPeer(_:)andsimulateDisconnectedPeer(_:)to add/remove links.connectFullMesh()helpers in tests build larger topologies. - Handlers: Tests can observe data via
messageDeliveryHandler(decodedBitchatMessage) andpacketDeliveryHandler(rawBitchatPacket). - De‑duplication: A thread-safe
seenMessageIDsprevents duplicate deliveries during flooding/relays.
Broadcast Flooding
- Flag:
MockBLEService.autoFloodEnabled - Intent: When
true, public broadcasts propagate across the entire connected component (ignores TTL for reach) while still de‑duping to prevent loops. - Usage: Enabled in Integration tests (
setUp) to simulate large-network broadcast; disabled in E2E tests to keep routing explicit and verify TTL behavior (seePublicChatE2ETests.testZeroTTLNotRelayed).
Rehandshake Flow (Noise)
- Why: The legacy NACK recovery path was removed; recovery now relies on Noise session rehandshake after decrypt failure or desync.
- Manager:
NoiseSessionManagermanages per-peer sessions. - Pattern: On decrypt failure, proactively clear the local session and re-initiate a handshake. The peer accepts and replaces their session.
- Test:
IntegrationTests.testRehandshakeAfterDecryptionFailure- Corrupts ciphertext to induce a decrypt error.
- Calls
removeSession(for:)on the initiator’s manager beforeinitiateHandshake(with:)to avoidalreadyEstablished. - Verifies encrypt/decrypt succeeds post-rehandshake.
Tips
- Determinism: Add small async delays only where handler installation/topology changes could race the first send.
- Scoping: Keep
autoFloodEnabledtoggled only within Integration tests; always reset intearDown()to avoid cross-test contamination. - Direct vs Relay: Private messages target a specific peer when adjacent; otherwise they are surfaced to neighbors for relay and, if known, also delivered to the target.
Quick Start
- Create nodes and connect them:
let svc = MockBLEService(); svc.myPeerID = "PEER1"svc.simulateConnectedPeer("PEER2")
- Observe messages:
svc.messageDeliveryHandler = { msg in /* asserts */ }
- Enable broadcast flooding for Integration suites only:
MockBLEService.autoFloodEnabled = true